Bild vom Institut
home uni uni suche search sitemap sitemap kontakt contact
unilogo University of Stuttgart
Institute of Engineering and Computational Mechanics

Staff

deutschicon
hoch Staff

Dominik Hamann, M.Sc.

Address Dominik Hamann
Institute of Engineering and Computational Mechanics
University of Stuttgart
Pfaffenwaldring 9
70569 Stuttgart, Germany
Office Pfaffenwaldring 9, 4th Floor
Room 4.123
Phone
Fax
+49 711 685-66626
+49 711 685-66400
Email dominik.hamann@itm.uni-stuttgart.de


Field of Research

Publications

  • Hamann, D.; Eberhard, P.:
    Sensitivity Analysis of Time-Delayed Systems.
    Proceedings International Conference on Multibody System Dynamics, Lisbon, Portugal, 2018.

  • Hamann, D.; Eberhard, P.:
    Stability Analysis of Milling Processes with Varying Workpiece Dynamics.
    Multibody System Dynamics, doi:10.1007/s11044-017-9604-5 , 2017.

  • Hamann, D.; Walz, N.-P.; Fischer, A.; Hanss, M.; Eberhard, P.:
    Fuzzy Arithmetical Stability Analysis of Uncertain Machining Systems.
    Mechanical Systems and Signal Processing, Vol. 98, pp. 534-547, 2017.

  • Baumann, M.; Hamann, D.; Eberhard, P.:
    Time-dependent Parametric Model Order Reduction for Material-Removal Simulations.
    Model Reduction of Parametrized Systems, MS&A (Modeling, Simulation and Applications), Vol. 17, 2017.

  • Hamann, D.; Walz, N.-P.; Fischer, A.; Hanss, M.; Eberhard, P.:
    Stability Analysis of Machining Processes with Parameter Uncertainty.
    Proceedings of the 9th European Nonlinear Dynamics Conference (ENOC 2017), Budapest, Ungarn, 2017.

  • Hamann, D.; Eberhard, P.:
    Milling Stability Analysis with Varying Workpiece Dynamics.
    Proceedings International Conference on Multibody System Dynamics, Montreal, Canada, 2016.

  • Hamann, D.; Eberhard, P.:
    Varying Workpiece Dynamics in Milling Stability Analysis.
    Special Issue - Joint 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung (DMV), PAMM, Vol. 16, No. 1, pp. 57-58, Braunschweig, Germany, 2016.

Poster-Presentations

  • March 27, 2018, 2. International Conference on Simulation Technology, Stuttgart;
    "Sampling Strategies in Stability Analysis of Uncertain Milling Processes"

  • October 05, 2017, 10. SimTech Statusseminar, Bad Boll, Germany;
    "Parameter Identification Based on Stability Lobe Diagrams of Machining Processes"

  • November 25, 2016, 9. SimTech Statusseminar, Bad Boll, Germany;
    "Stability Analysis of Uncertain Machining Processes"

Talks

  • June 26, 2018, 5th Joint International Conference on Multibody System Dynamics (IMSD 2018), Lisbon, Portugal;
    "Sensitivity Analysis of Time-Delay Systems"

  • May 30, 2018, Statusseminar Institut für Technische und Numerische Mechanik, Bad Herrenalb, Germany;
    "On Sensitivity Analysis of Time-Delayed Systems"

  • June 27, 2017, 9th European Nonlinear Dynamics Conference (ENOC 2017), Budapest, Hungary;
    "Stability Analysis of Machining Processes with Parameter Uncertainty"

  • May 22, 2017, Statusseminar Institut für Technische und Numerische Mechanik, Bad Liebenzell, Germany;
    "Uncertain Stability Lobe Diagram"

  • February 24, 2017, Presentation at Library of the Department of Applied Mechanics, Budapest, Hungary;
    "Milling Stability Analysis with Varying Dynamics"

  • January 27, 2017, SimTech Milestone Presentation, Stuttgart, Germany;
    "Modeling and Simulation of Flexible Machine Tools including Chipping and Material Removal"

  • October 07, 2016, Dynamiktag, Institut für Technische und Numerische Mechanik, Stuttgart, Germany;
    "Stability Analysis of Machining Processes"

  • June 28, 2016, Statusseminar Institut für Technische und Numerische Mechanik, Bad Liebenzell, Germany;
    "Machining with Varying Dynamics"

  • March 11, 2016, Joint Annual Meeting of GAMM and DMV, Braunschweig, Germany;
    "Varying Workpiece Dynamics in Milling Stability Analysis"

  • June 25, 2015, Simtech "Manufacturing", Stuttgart, Germany;
    "Investigation on Machining Processes at the ITM"

  • June 17, 2015, Statusseminar Institut für Technische und Numerische Mechanik, Bad Liebenzell, Germany;
    "Development of a Toolbox for the Analysis of Periodically Time-Varying Systems with Time Delay"

  • March 3, 2015, EUROMECH-Colloquium, Stuttgart, Germany;
    "Smoothed Particle Hydrodynamics Simulation of Friction Stir Welding"

Supervised Studentthesis

  • Untersuchung des Aufbaus elastischer Körper zur paramterischen Modellordnungsreduktion mit Matrixinterpolation,
    bachelor thesis, Institute of Engineering and Computational Mechanics, University of Stuttgart.
    Supervision in cooperation with Benjamin Fröhlich, M.Sc.

  • Zur Verwendung reduzierter schaltender Systeme für die Simulation elastischer Körper mit bewegten Lasten,
    master thesis, Institute of Engineering and Computational Mechanics, University of Stuttgart.
    Supervision in cooperation with Benjamin Fröhlich, M.Sc.

  • Untersuchung des Diskretisierungseinflusses auf die Interpolationsgüte elastischer Körper in der parametrischen Modellordnungsreduktion,
    student thesis, Institute of Engineering and Computational Mechanics, University of Stuttgart.
    Supervision in cooperation with Benjamin Fröhlich, M.Sc.

  • Untersuchung von Konzepten zur Regelung von totzeitbehafteten mechanischen Systemen,
    bachelor thesis, Institute of Engineering and Computational Mechanics, University of Stuttgart.
    Supervision in cooperation with Fabian Schnelle, M.Sc.

  • Auswahl lokaler Systeme in der parametrischen Modellordnungsreduktion elastischer Mehrkörpersysteme,
    master thesis, Institute of Engineering and Computational Mechanics, University of Stuttgart.
    Supervision in cooperation with Dipl.-Ing. Michael Baumann

Teaching