Practical Training Technical Dynamics

The practical training Technical Dynamics consists of eight single experiments and counts as credits without grade (unmarked credit points). For students who study Technical Dynamics as a major subject, 6 of the 8 experiments to be done are already covered. The missing 2 experiments can be chosen out of the pool of the ITM experiments or the general offer of other institutes, see the APMB catalog. Experiments will take place during the winter and the summer semester.

Remarks on the practical training in the summer term 2023 

The dates for the practical training for the current semester are listed below. For the registration please send an e-mail in the time starting from
SF: 10th May and not later than 21st May
APMB: 24th May and not later than 5th April
to Eva Hartlieb containing the following information
    -name
    -name of the practical training and its date
    -course of study
    -APMB or SF

You will receive further information after your registration. For urgent questions please turn to Eva Hartlieb.

Meeting point for all experimental practical trainings will be in front of the ITM laboratory, Pfaffenwaldring 9, 3rd floor. In the corridor, there are some posters providing an insight into the offered practical trainings.

Seven experimental practical training and three simulation training will be offered. The experimental practical training is held in one afternoon and is offered on different days.

The following Practical Trainings are expected to take place in the summer semester 2023 on the following dates always between 2 and 4:30 p.m.:

• Experimental Modal Analysis 
  (15th May or 17th May), advisor: Andreas Schönle, M.Sc.
• Controller Design for a Model Railway 
  (22nd May or 24th May), advisor: Henrik Ebel, M.Sc.
• Machine Foundation 
  (5th June or 7th June), advisor: Tom Könecke and Steffen Maier, M.Sc.
• Control of the Motion of Optical Lenses 
  (12th June or 14th June), advisor: Mark Kurcsics and Luzia Hahn, M.Sc.
• Balanced Ball on Rim 
  (19th June or 21st June), advisor: Mario Rosenfelder, M.Sc.
• Active Vibration Absorber 
  (26th June or 28th June), advisor: Jonas Kneifl, M.Sc.
• Flexible Multibody Systems I, Software Training, the dates will be announced in the lecture, advisor: Johannes Rettberg, M.Sc.
• Flexible Multibody Systems II, Software Training, the dates will be announced in the lecture, advisor: Johannes Rettberg, M.Sc.
• Flexible Multibody Systems III, Software Training, the dates will be announced in the lecture, advisor: Johannes Rettberg, M.Sc.

Eight experimental practical training and one simulation training will be offered.

The following Practical Training will take place in the winter semester 2022/2023 on the following dates always between 2 and 4:30 p.m.:

• Robotino Motion Control 
  (details will follow), advisor: Jingchan Chen, M.Sc.
• Flexible One-Arm-Robot  
  (details will follow), advisor: Lennart Frie, M.Sc.
• Acoustic Measurements and Sound Visualization
  (details will follow), Betreuer: Hannes Eschmann, M.Sc.
• Thermographic Data with an IR Camera About Mechanical Problems
  (details will follow), advisor: Manuel Vierneisel, M.Sc.
• Micro-Mechanical Oscillation Inducer  
  (details will follow), advisor: Mario Hermle, M.Sc.
• Active Vibration Absorber  
  (details will follow), advisor: Jonas Kneifl, M.Sc.
• Robot Kinematics  
  (details will follow)), advisor: Johannes Rettberg, M.Sc.
• Regulation of an Expo-Pendulum  
  (details will follow), advisor: Henrik Ebel, M.Sc.
• Multibody Simulation with Neweul-M², Software Training  
  (details will follow), advisor: Arnim Kargl, M.Sc.