This image shows Markus Mäck

Markus Mäck

Dr.-Ing.

(2016 - 2021)
Institute of Engineering and Computational Mechanics

Contact

Subject

black: published, green: accepted for publication, orange: submitted for publication

  • Mäck, M.; Hanss, M.: An Advanced Sampling Technique for Possibilistic Uncertainty Propagation. Mechanical Systems and Signal Processing, Vol. 146, 2021.
    DOI: https://doi.org/10.1016/j.ymssp.2020.107064
  • Mäck, M.; Hanss, M.: Efficient Possibilistic Uncertainty Analysis of a Car Crash Scenario Using a Multi-Fidelity Approach.
    ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering (2018).
    DOI: 10.1115/1.4044243
  • Mäck, M.; Hanss, M.: Uncertainty Analysis of a Car Crash Scenario Using a Possibilistic Multi-Fidelity Scheme.
    Proceedings of the 3rd International Conference on Uncertainty Quantification in Computational Sciences and Engineering UNCECOMP 2019, Crete (Greece), June 24-26 2019.
  • Hose, D.; Mäck, M.; Hanss, M.: On Probability-Possibility Consistency in High-Dimensional Propagation Problems.
    Proceedings of the 3rd International Conference on Uncertainty Quantification in Computational Sciences and Engineering UNCECOMP 2019, Crete (Greece), June 24-26 2019.
  • Mäck, M.; Caylak, I.; Edler, P.; Freitag, S.; Hanss, M.; Mahnken, R.; Meschke, G.; Penner, E.: Optimization with constraints considering polymorphic uncertainties.
    GAMM-Mitteilungen, 2019.
    DOI: https://doi.org/10.1002/gamm.201900005
  • Biehler, J.; Mäck, M.; Nitzler, J.; Hanss, M.; Koutsourelakis, P.-S.; Wall, W. A.: Multi-Fidelity Approaches for Uncertainty Quantification
    GAMM-Mitteilungen, 2019.
    DOI: https://doi.org/10.1002/gamm.201900008
  • Hose, D.; Mäck, M.; Hanss, M.: Robust Optimization in Possibility Theory.
    ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering (2018).
    DOI: doi: 10.1115/1.4044037
  • Mäck, M.; Hanss, M.: A Multi-fidelity Approach for Possibilistic Uncertainty Analysis.
    Proceedings of the 7th International Conference on Uncertainties in Structural Dynamics USD2018, KU Leuven, Belgien, September 2018.
    [.pdf] (password required)
  • Hose, D; Mäck, M.; Hanss, M.: A Possibilistic Approach to the Optimization of Uncertain Systems.
    Proceedings of the 3rd International Conference on Vulnerability and Risk Analysis and Management, ICVRAM 2018, and the 7th International Symposium on Uncertainty Modeling and Analysis, ISUMA 2018. Florianopolis, SC Brazil, April 8-11 2018.
    [.pdf]
  • Hanss, M.; Mäck, M.: Certainly uncertain - the charm of fuzzy predictions.
    Procedia Engineering 199: 48-55, 2017.
    DOI: https://doi.org/10.1016/j.proeng.2017.09.149
  • Mäck, M.; Hose, D; Hanss, M.: On Using Fuzzy Arithmetic in Optimization Problems with Uncertain Constraints.
    Proceedings in Applied Mathematics and Mechanics, 31 May 2017.
    DOI: https://doi.org/10.1002/pamm.201710017
  • Mäck, M.; Hanss, M.: An Approach to Robust Design of a Crumple-Zone Structure Using Fuzzy Arithmetic.
    Proceedings of the UNCECOMP 2017, Rhodos, Griechenland, 2017.
    DOI: https://doi.org/10.7712/120217.5369.16837
  • Mäck, M.: Verzahnungsmodellierung, Masterarbeit.
    Karlsruhe: Karlsruher Institut für Technologie (KIT), Institut für Technische Mechanik, 2015.
  • September 26th, 2019: Jahrestreffen SPP 1886, Hamburg
    "Robust Design of Energy-Absorbing Crumple-Zone Structures Considering Uncertainties - Conclusion of the First Funding Phase"
  • June 25th, 2019: UNCECOMP 2019, Crete, Greece
    "Uncertainty Analysis of a Car Crash Scenario Using a Possibilistic Multi-Fidelity Scheme"
  • June 4th 2019: Statusseminar ITM, Bad-Herrenalb
    "On Chocolate Pudding and (Efficient) Uncertainty Propagation"
  • October 10th, 2018: Jahrestreffen SPP1886/ Summer School, Udine, Italien
    "Robust Design of Energy-Absorbing Crumple-Zone Structures Considering Uncertainties - Optimization and Modeling"
  • September 18th, 2018: ISMA-USD, Leuven, Belgien
    "A Multi-fidelity Approach for Possibilistic Uncertainty Analysis"
  • May 28th, 2018: Statusseminar ITM, Bad-Herrenalb
    "Towards Efficient Possibilistic Uncertainty Quantification - Or: How Low Can You Go?"
  • December 4th, 2017: Treffen Komplex B SPP1886, Dresden,
    "How to Handle Dependent Variables in Possibilistic Uncertainty Analysis"
  • October 12th, 2017: Jahrestreffen SPP1886, München,
    "Robust Design of Energy-Absorbing Crumple-Zone Structures Considering Uncertainties - Current State and Outlook"
  • June 27th, 2017: Weierstraß-Institut (WIAS), Berlin,
    "Numerical Implementation of Fuzzy Arithmetic in Uncertainty Analysis"
  • June 16th, 2017: UNCECOMP 2017, Rhodos, Griechenland,
    "An Approach to Robust Design of a Crumple-Zone Structure Using Fuzzy Arithmetic"
  • May 23th, 2017: Statusseminar ITM, Monbachtal,
    "Uncertainty Modeling in Crash Analysis"
  • May 12th, 2017: Vernetzungsworkshop SPP1886, Dresden,
    "Robust Design of Energy-Absorbing Crumple-Zone Structures Considering Uncertainties"
  • June 29th, 2016: Statusseminar ITM, Monbachtal,
    "Road to SPP 1886 - Current State of FAMOUS"

 

  • On different methods for the efficient solution of the α-cut optimization, project work. (in progress)
    Institute of Engineering and Computational Mechanics, University of Stuttgart, 2018.
  • STUD 486: Quantifizierung von Unsicherheiten in vereinfachten mechanischen Ersatzsystemen, Studienarbeit. Institute of Engineering and Computational Mechanics, University of Stuttgart, 2018.
    Betreuung gemeinsam mit Dominik Hose, M.Sc.
  • STUD 484: Model Updating of Mechanical Systems Under Polymorphic Uncertainties, Studienarbeit.
    Institute of Engineering and Computational Mechanics, University of Stuttgart, 2018.
    Betreuung gemeinsam mit Dominik Hose, M.Sc.
  • SA 020: Robuste Bilderkennung mithilfe von Clustering-Methoden unter Berücksichtigung von Unsicherheiten, Projektarbeit.
    Institute of Engineering and Computational Mechanics, University of Stuttgart, 2017.
    Betreuung gemeinsam mit Dipl.-Math. Dennis Grunert
  • STUD 478: Parametric Structure Optimization of a Crumple Zone Under Consideration of Uncertainties, Studienarbeit.
    Institute of Engineering and Computational Mechanics, University of Stuttgart, 2017.
  • MSC 250: Investigations on the Optimization of Multibody Systems in the Presence of Uncertainty, Masterarbeit.
    Institute of Engineering and Computational Mechanics, University of Stuttgart, 2017.

 

 

  • Maintenance of the software package FAMOUS.
  • Printer maintenance

 

To the top of the page