Bild vom Institut
home uni uni suche search sitemap sitemap kontakt contact
unilogo University of Stuttgart
Institute of Engineering and Computational Mechanics

Staff

deutschicon
hoch Staff

Fabian Kempter, M.Sc.

Address Fabian Kempter
Institute of Engineering and Computational Mechanics
University of Stuttgart
Pfaffenwaldring 9
70569 Stuttgart, Germany
Office Pfaffenwaldring 9, 3rd Floor
Room 3.103
Phone
Fax
+49 711 685-66201
+49 711 685-66400
Email fabian.kempter@itm.uni-stuttgart.de(Public PGP-Key)


Field of Research

    Numerical and Experimental Validation of Muscle Actuated Human Body Models for Driving Safety

Publications

black: published, green: accepted for publication,  orange: submitted for publication
  • Kempter, F.; Fehr, J.; Stutzig, N.; Siebert, T.:
    On the Validation of Human Body Models with a Driver-in-the-Loop Simulator.
    Proceedings in Joint International Conference on Multibody System Dynamics - IMSD, Lissabon, 2018. (16 pages)

  • Martynenko, O.; Kempter, F.; Kleinbach, C.; Schmitt, S.; Fehr, J.:
    Integrated Physiologically Motivated Controller for the Open-Source Extended Hill-type Muscle Model in LS-DYNA.
    Proceedings of IRCOBI Conference, Athens, 2018. (2 pages)

  • Kempter, F.; Fehr, J.:
    Layout of a Driver-in-the-Loop Simulator for Validation of Human Body Models.
    Proceedings in Applied Mathematics and Mechanics, Munich, 2018. (2 pages)

  • Martynenko, O.; Kempter, F.; Kleinbach, C.; Schmitt, S.; Fehr, J.:
    Development of an internal physiological muscle controller within an open-source Hill-type material model in LS-DYNA.
    Proceedings in Applied Mathematics and Mechanics, Munich, 2018. (2 pages)

  • Kempter, F.; Fehr, J.:
    Validation of Active Human Body Models with a Driver-in-the-Loop Simulator.
    GMA Fachausschuss 1.30: "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik", Anif/Salzburg, 2017. (2 pages)

  • Fehr, J.; Kempter, F.; Kleinbach, C.; Schmitt, S.:
    Guiding Strategy for an Open Source Hill-type Muscle Model in LS-Dyna and Implementation in the Upper Extremity of a HBM.
    Proceedings of IRCOBI Conference, Antwerp, Belgium, 2017. (2 pages)

  • Kempter, F.:
    Untersuchung der Möglichkeiten zur Muskelumlenkung in LS-Dyna und Anwendung in einem Armmodell, Masterarbeit MSC-248.
    Institut für Technische und Numerische Mechanik, Universität Stuttgart, 2017.

Poster

  • Fehr, J.; Kempter, F.; Kleinbach, C.; Schmitt, S.: 14. September 2017: Guiding Strategy for an Open Source Hill-type Muscle Model in LS-DYNA, IRCOBI Conference 2017, Antwerp.

Supervised diploma and student theses

  • "Markerbasierte Lokalisierung von Objekten mit einer Infrarotkamera und deren netzwerkbasierte Nutzung für Regelungsaufgaben", bachelor thesis.
    University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018 (running).
    Supervision together with Henrik Ebel, M.Sc.

  • "Echtzeitfähige Simulationsmodelle des Menschen für die Pre-Crash Phase", bachelor thesis.
    University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018 (running).
    Supervision together with Jun.-Prof, Dr.-Ing. Jörg Fehr

  • "Simulation und Analyse von Motorradunfällen mit Hilfe des Mehrkörpersimulations­programm MADYMO", bachelor thesis.
    University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018 (running).
    Supervision together with Jun.-Prof, Dr.-Ing. Jörg Fehr

  • "Investigation of Occupant Response in Rear-End Crash Simulations with an Active Human Body Model", master thesis.
    Sapienza University of Rome, 2018. (running)
    Supervision together with Dipl.-Ing. Christian Kleinbach

  • Vierneisel, M.: "Entwicklung eines Modells des menschlichen vestibulären Systems zur Gütebewertung von Motion Cueing Algorithmen", bachelor thesis BSC-87.
    University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018.

  • Laporta, R.: "Automatisierte Rekonstruktion der Fahrerkinematik in einem Driver-in-the-Loop Prüfstand mittels eines Motion Capture Systems", bachelor thesis BSC-87.
    University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018.

  • Parlapanis, C.: "Entwicklung eines automatisierten Ablaufs zur Simulation von Insassenbewegungen in Pre-Crash Szenarien mit MADYMO", bachelor thesis BSC-73.
    University of Stuttgart, Institute of Engineering and Computational Mechanics, 2017.

  • Büchele, S.: "Modellierung von Pre-Crash Fahrszenarien auf einem Driver-in-the-Loop Prüfstand", bachelor thesis BSC-71.
    University of Stuttgart, Institute of Engineering and Computational Mechanics, 2017.

Talks

  • 30. Mai 2018: Statusseminar ITM, Bad Herrenalb, "Drivers’ Behavior inside a Driver-in-the-Loop Simulator - What's Next?"

  • 21. March 2018: GAMM Annual Meeting, Munich, "Layout of a Driver-in-the-Loop Simulator for Validation of Human Body Models"

  • 21. September 2017: GMA-Fachausschuss 1.30 - "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik", Anif/Salzburg, "Validation of Active Human Body Models with a Driver-in-the-Loop Simulator"

  • 23. May 2017: Statusseminar ITM, Monbachtal, "Investigation of Driver Behavior in Pre-Crash Scenarios for Validation of Active Human Body Models"

Teaching