Bild vom Institut
home uni uni suche search sitemap sitemap kontakt contact
unilogo University of Stuttgart
Institute of Engineering and Computational Mechanics

Staff

deutschicon
hoch Staff

Dr.-Ing. Andreas Hanselowski, M.Sc. (2011 - 2016)

Address Andreas Hanselowski
Institute of Engineering and Computational Mechanics
University of Stuttgart
Pfaffenwaldring 9
70569 Stuttgart, Germany
Email


Field of Research

Publications

black: published, green: accepted for publication,  red: submitted for publication
  • Hanselowski, A.; Ihrle, S.; Hanss, M.:
    Fuzzy Bayesian estimation for the identification of fuzzy-parameterized models in the framework of model updating.
    In Proceedings of the ISMA-USD 2016, Leuven, Belgium, 2016.
  • Hanselowski, A.; Hanss, M.:
    A Model Updating Method based on Inverse Fuzzy Arithmetic.
    In Proceedings of GACM 2015, Aachen, Gemany, 2015;
  • Hanselowski, A.; Ihrle, S.; Hanss, M.:
    A Fuzzy Model Updating technique motivated by Bayesian Inference.
    In Proceedings of UNCECOMP 2015, Crete Island, Greece, 2015;
  • Hanselowski, A.; Hanss, M.:
    Uncertainty and Sensitivity Analysis of Different Models of Brake Squeal.
    PAMM, Proceedings in Applied Mathematics and Mechanics. Special Issue: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen, 2014;
  • Hanselowski, A.; Hanss, M.:
    Analysis of Epistemic Uncertainty for the Friction-Induced Vibration.
    ZAMM, Journal of Applied Mathematics and Mechanics, Special issue ICoVIS 2013, 2015 (12 Pages).
  • Hanselowski, A.:
    Untersuchung und Vergleich von Integrationsalgorithmen in Neweul-M2.
    Master Thesis, DIPL-MSC-177. University of Stuttgart, Institute of Engineering and Computational Mechanics, 2011.

Talks

  • July 21th, 2015: 6th GACM Colloquium on Computational Mechanics - GACM 2015, Aachen,
    "A Model Updating Method based on Inverse Fuzzy Arithmetic"
  • June 16th, 2015: Seminary of the Institute, Monbachtal Bad Liebenzell,
    "Grey-Box System Identification using Artificial Neural Networks"
  • June 26th, 2014: Seminary of the Institute, Monbachtal Bad Liebenzell,
    "Model Updating in Presence of Uncertainties"
  • March 12th 2014: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics - GAMM 2014, Erlangen,
    "Uncertainty and Sensitivity Analysis for Different Models of Brake Squeal"
  • September 30th, 2013: 5th GACM Colloquium on Computational Mechanics - GACM 2013, Hamburg,
    "Uncertainty Analysis for Models of Brake-Squeal Phenomena"
  • July 24th, 2013: 3rd International Conference on Vibro-Impact Systems and Systems with Non-Smooth Interactions - ICOVIS 2013, Leinsweiler,
    "Fuzzy Arithmetical Uncertainty Analysis for Friction-Induced Vibrations"
  • June 11th, 2013: Seminary of the Institute, Monbachtal Bad Liebenzell,
    "Analyse des Bremsenquietschens anhand eines Stab-Scheibe Systems"
  • June 12th, 2012: Seminary of the Institute, Monbachtal Bad Liebenzell,
    "Inverse Fuzzy Analysis for Estimation of uncertain Parameters"

Supervised Student- and Diplomathesis

  • Bartosz, Zelek:
    Comparison of stochastic and fuzzy methods for the analysis of uncertainty of different origins,
    Master Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.
  • Valeria, Carpineti:
    Brak squeal analysis for a pad-on-disc system,
    Master Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.

  • Manuel, Wirth:
    Simulation von reibungserregten Systemen in Neweul-M2,
    Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.
    In co-supervision with Dipl.-Ing. Philip Holzwarth.
  • Alaa, Fezai:
    Optimierung des Verfahrens zur Simulation von reibungserregten Schwingungen in Neweul-M2,
    Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.
    In co-supervision with Dipl.-Ing. Igor Iroz.
  • Alexander, Heimann:
    Model-Updating und Model-Selection an einem Balken,
    Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
  • Aulon, Bajrami:
    Analyse des Bremsenquietschens an einer Scheibenbremse,
    Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
  • Christian, Kleinbach:
    Definition von Reibkontakten in Neweulm2 ,
    Diplomarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
    In co-supervision with Dipl.-Ing. Igor Iroz.
  • Oliver, Stump:
    Vertikaldynamik einfacher Fahrzeugmodelle mit nichtlinearen Feder-Dämpferkennlinien,
    Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
  • Cinja, Lehmann:
    Dynamik von Gehbewegungen auf weichen Schuhsohlen,
    Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
  • Benjamin, Fröhlich:
    Modalanalyse und Model-Updating für ein Balken-Scheibe-System,
    Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
    In co-supervision with Dipl.-Ing. Pascal Bestle.
  • Missler, Jonas:
    Auswirkungen von Unsicherheiten auf vorgesteuerte Mehrkörpersysteme am Beispiel einer flexiblen Lambda-Kinematik,
    Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2012.
    In co-supervision with Dipl.-Ing. Markus Burkhardt.
  • Giszas, Sebastian:
    Vergleichende Untersuchung des Eigenlenkverhaltens von Fahrzeugmodellen,
    Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2012.

Teaching


Additional Services at the Institute

  • Development of the simulation platform for mechanical Multibody Systems Neweul-M²